home *** CD-ROM | disk | FTP | other *** search
- Path: idt.unit.no!torrunes
- From: datakompaniet@interlink.no (DataKompaniet as)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Apollo 3060 installation problems
- Date: 19 Mar 1996 13:12:17 GMT
- Organization: DataKompaniet as
- Sender: torrunes@idt.unit.no (Tor Rune Skoglund)
- Message-ID: <4imbrh$hi1@due.unit.no>
- References: <4iet9m$sn3@gordon.enea.se>
- NNTP-Posting-Host: eik4.idt.unit.no
- Keywords: A3000, SCSI, Apollo, MC68060
-
- In article <4iet9m$sn3@gordon.enea.se>, olli@enea.se (Ola Liljedahl) writes:
- |> I just received my Apollo 3060 (MC68060/F-SCSI-II) for desktop Amiga 3000.
- |> I followed the installation instructions (in german...) but it did not
- |> work. The hardware installation concerns the accelerator board and a patch
- |> to the WD SCSI controller.
-
- The wire to the Kickstart adapter was incorrectly soldered to
- pin 8 with some cards. It should be on pin 9.
-
- I am posting this here in case someone else has the same problem.
-
- - Best Regards,
-
- Tor Rune Skoglund DataKompaniet as
- Tech. Manager/Partner Trondheim Innovation Centre
- Tel: +47 7354 0375 N-7030 Trondheim
- Fax: +47 7394 3861 Norway
- E-mail: datakompaniet@interlink.no
- WWW: http://www.interlink.no/datakompaniet
-